◆SKMEI 1025 Watch Instruction

 SKMEI 1025 Digital Watch Dial Plate

(SKMEI 1025 Digital Watch Dial Plate)

1) Functions 

  • In normal display mode shows: month -date-week- hour -minute - second
  • Modes change: press S3 button
  • Back light press S4 button

2) Modes of watch

Modes of SKMEI 1024

3) Chronograph functions

How to set chronograph of SKMEI 1024

4) Set up to alarms

  • Hours: In normal display Mode, press S3 twice to the alarm mode ,then press S2 the “Hours" flashing, press S1 to adjust the Hour.
  • Minutes: Press S2 again the “Minutes” flashing, press S1 to adjust the Minutes.
  • Tap S3 to save / exit.

5) Alarm and chime ON/OFF

In normal display Mode, press S3 twice to the alarm modes,press S1 to ON/OFF alarm function,if the symbol of  “🔔” appear , means alarm ON, otherwise means OFF. same action to ON/OFF hourly time signal function, if the “” appears to ON this function, and the watch will chime hourly , otherwise will not. 

6) Set time & date

In normal display Mode, press S3 three times to enter Time&Date setting mode and "the seconds" flashing.

  • Hours: press S2 and the hours will flash, press S1 to adjust the hours (“H” means 24H format)
  • Minutes: press S2 and the minutes will flash, press S1 to adjust the minutes.
  • Months: press S2 and the month will flash. press S1 to adjust the month (1=January, 2=February ...)
  • Date: press S2 and the date will flash. press S1 to adjust date
  • Day of Week: press S2 and the day of the week will flash. press S1 to adjust the week (MO=Monday...)
  • Tap S3 to exit.

* See also 12 digits operation manual