SKMEI 1251 Watch Manual

◆SKMEI 1251 Watch Instruction

（SKMEI 1251 digital watch dial）

A. Features

• 13 Digits, Hour ,Minutes ,Seconds ,Month,Day and Week
• Daily Alarm Chime hourly and Snooze Function
• 12 / 24H format selectable, Auto Calendar
• 1/100 second Chronograph with split functions
• Count Down (Upper limit : 24H)
• Dual Time
• EL backlight

B. Operational Manual

1.At any state ,press Ａ key EL backlight for 3s .
2.Real Time

• Time Setting
• a)Press and hold Ｃ key for 2s to time setting state and "Second" flashing, press D key to zero; Press B key to select item as following sequence :
  
• b).Press Ｄ key to adjust the flashing item,
• c).Press C key to return to Real Time Mode.
• d). Press D key while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes .In the range of 00 to 59 resets them to 00 and adds to the minutes. In the range of 00 to 29,the minutes are unchanged.
• e) 12/24-Hour format :In the timekeeping Mode, Use D to toggle between 12-hour (12H) and 24-hour (24H) timekeeping.

3.Daily Alarm
In Real Time Mode, press B key enter into Alarm Mode
Press C key to turn on/off Alarm()and Snooze(Snz)

• Alarm setting
  Press and hold Ｃ key for 2s to select "Hour" setting ; Press B key to select "Minute" setting; Press Ｄ key to adjust the flashing item.
  Hour → Minute

4.Chronograph
In Real Time Mode , press B key twice enter into Chronograph Mode

• Press Ｄ key to Start/Stop running ;When stop, press C key to zero.
• When running ,press Ｃ key to split Counting. Then press Ｄ key to exit split count ,and stop counting ; When exit split count ,press Ｃ key to zero.

5.Dual Time

• Dual Time setting
  In Real Time mode , Press B key 3 times to enter Dual Time Mode, Press and hold Ｃ key for 2s to select " Hour " setting, Press B key to select " Minute " setting, Press Ｄ key to adjust the flashing item, Press Ｃ key again to finish setting ,and return to Dual Time displaying mode .

6.Timer Mode

• In Real Time Mode,press B key four times enter into Timer mode
• Press D key to Start/Stop countdown
• When stop the countdown,press C key back to the first setting time
• Timer alarm sounds for about 10s when counting down to 0:00:00.The timer is automatically reset to its starting value after the alarm stops.
• Press C key 2s enter into countdown time setting
  a).Press B key to adjust “Hour” and then “Minute”
  Hour → Minute
  b).Press D key to adjust the flashing item
  c).Press C key to confirm