◆SKMEI 1360 Watch Instruction
（SKMEI 1360 compass watch button）
A. Features
- OLED display hour, minute, second, week, date, year, temperature function
- Week:Chinese and English options , automatic display
- Stopwatch (Max:23:59”59)
- 12 / 24H format selectable
- Daily alarm and chime hourly
- Pedometer function
- Compass function
- Count down function
- Dual time function
- Press any key, EL light illuminates for 10 seconds
B. Operational Manual
C. Functional mode:
D. Function settings
1. Time and Date setting
- In normal time mode,press A key for 3 seconds to enter time setting mode and “12H”flashing
- Press B key to select other items as follows:
- Press C key to switch 12H/24H
- Press C/D key to adjust the flashing item
- Press A Key to confirm and then return to the normal time mode
2. Stopwatch and Split counting
- Stopwatch running range:00:00”00 to 23:59”59
- In stopwatch mode,press C key to start stopwatch,press C key again to stop,when stop ,press A key to 00:00”00
- When the stopwatch is running,press B to switch to other display modes, and the stopwatch runs in the background.
3. Countdown Function
- The countdown can be set from 1 second to 24 hours,when the countdown reaches to zero,the alarm will ring.
- Press C key to Start / Stop counting,when stop counting ,press A key,It will automatically return to initial setting time
- When the countdown reaches to zero, the alarm sounds for about 10 seconds,press any key to stop ring;When the ring stops,it will automatically return to initial setting time
- Time setting: In countdown mode,press A key for 3 seconds and “Hour”flashing,Press B key to select the following item
- Press C/D key to adjust the flashing item
- Press A key to confirm and then return to the countdown mode.
4. Alarm Function
- In alarm mode, press C key to switch mode as follows:
- In relative mode，press A key to turn on / turn off the function
- In alarm mode,Press A key for 3 seconds,“Hour” flashing, press B key to select setting as follows:
- Press C/D key to adjust the flashing item
- Press A to confirm and then return to the alarm mode.
- In alarm and snooze mode,press A key for 3 seconds, “Hour” flashing, press B key to select setting as follows:
- Press C/D key to adjust the flashing item
- Press A key to confirm and then return to snooze mode.
- Snooze alarm will ring again for 7 times after 5 minutes,the alarm can be stopped by pressing any key.
- Alarm does not have snooze function,but snooze have snooze alarm function
- After the Hourly chime alarm is on ,it will ring at every hour
5. Dual time mode
- In dual time mode ,press A key for 3 seconds,“Hour”flashing,Press B key to select setting
- Press C/D key to adjust the flashing item
- Press A key to confirm and then return to dual time mode
6. Pedometer mode
- In pedometer mode ,press C key to “turn on/turn off” the pedometer function
- In pedometer mode,press A key to switch mode
- In pedometer mode,press A key for 3 seconds to enter setting mode
- Metric System/Imperial System: The default item is metric,press C key convert Metric System/Imperial system
- Setting weight :The default value is 50kg(20IN),adjustable range:20-200kg/44-440Lb
- Setting step distance :Default step distance is 70cm (154LB),adjustable range :30-200cm/12-79in
- Press C key to increase the flashing item,Press D key to decrease the flashing item,The metric /imperial system haven’t fast increase function.
- In setting mode,Press A key to return to pedometer mode
7. Pedometer Query Function
- In pedometer query mode, press C key to inquiry the historical data within 7 days, press A key to inquiry a certain day’s data.
8. Compass Function
- In the compass mode, turn the movement to display the compass angle
- Press A key for 3 seconds to enter compass correction mode
- In compass correction mode 1,arrow point to the direction of 6 ,press C and then appear “OK” to enter compass correction mode 2
- In compass correction mode 2,rotate 180 degrees, arrow point to the direction of 6, press C and then appear “OK” to finish correction.
- Magnetic declination correction
- Press C/D key to adjust the flashing item
- Press A key to confirm and then return to compass mode