◆SKMEI 1773 Watch Instruction
（SKMEI 1773 Digital Watch Button）
- Timing function display: seconds, minutes, hours, date, day of the week and month;
- Stopwatch has 1/100 seconds, seconds, minutes and hours;
- SPL segment timing function;
- Countdown function with second, minute and hour display;
- 12 hours and 24 hours display;
- Time function;
- Alarm clock and punctuality function;
- Colorful lights display.
Select Function Mode
- Press C key to switch the mode .
- At any function screen display, press B key to light the colorful light display (long press switch light).
- Normal time mode can be used to set and check the current time, day and week, in the normal time mode screen press A key can check the month and day, in order to distinguish the current day and month, in the normal time mode just display day.
Time and Date Setting
- In normal time mode, press D key until the seconds start flashing , you can set them
- Press C key to switch setting item as below (flashing can be set):
Press C key to change the set value as below
setting keys operation seconds Press A key can make seconds to zero Hours, minutes, month, day, week Press A key can change the set value 12/24 hour conversion Press A key can alternate 12 hours or 24 hours mode
Press D key to return to the normal mode.
- This watch with automatic calendar, but when you replace the battery, you need to set the calendar again.
Alternate 12/24 hour mode
- In 12/24 hour display screen,press A key to alternately change 12 hours or 24 hours mode
- 12-hour mode, the indicator“ P”( afternoon) will appear on hour’s left side, indicating the time between noon and 11:59 p.m.; between midnight and 11:59 a.m., no indicator will appear on hour’s left;
- 24-hour mode, the time will be between 0:00 and 23:59, at this time, no indicator appears;
- Other function of this watch will be set at 12/24 hour mode according to normal time mode selecting.
- Stopwatch function can be used to measure elapsed time, midway time and completion time of two contestants;
- The measurement range of this watch is 23 hours 59 minutes 59.99 seconds;
- If you do not stop the stopwatch, it will continue to test time, when reach the time limit, stopwatch will re-test time from 0;
- Even if you exit the stopwatch function screen,stopwatch will also continue to measure time.
Use stopwatch to measure time (as below)
- This watch can set normal time alarm time and second time alarm time, both can only choose one to set, it can be time, minutes, normal time alarm 1/ second time alarm 2 set;
- This watch with hour alarm function, after turning on this function,2 beeps will be emitted every hour;
- Alarm setting (and hour alarm function setting) must be in the alarm function mode, press C key to enter the function mode;
- At the alarm function mode, press A key to open or stop the alarm function;
- after alarm function open, the alarm function indicator will be appeared in all mode screen.
- In alarm mode, press D key until the alarm time flashes, can start setting;
- Press C key to set alarm time as below( flashing can be set)
- Press A key to increase the set value when it flash; If in 12 hours mode, pay attention to the alarm time in the morning (no indicators) and afternoon (with indicator P), set must be correct;
- Press D to finish setting.
- When Reaching the alarm time, the alarm will ring for 15 seconds
- Press any key can stop the alarm ringing;
- In every function mode, alarm and hour alarm will be rung;
- After displaying the alarm mode, press A key to open or stop the alarm function;
- After hour alarm function open ,indicator (CH)will appear in the all mode screen.
Measurement range is 23 hours 59 minutes 59.99 seconds;
Setting the countdown
- Press C key to enter the countdown time mode;
- After entering the countdown time mode, press D key until the hour start flashing, can enter setting ;
- Press C key follow below to set (flashing can be set);
- Press A key to adjust the flashing value;
- Press D key to finished setting. Then press A key to start/stop to countdown function;
- At the end of the countdown ,10 seconds ahead of with 1 ringing /second, the end of the countdown issued 3 ringing/ second , lasting 10 seconds.
Test Alarm Ringing
- When display 0:00 00 in countdown mode, press A key can make alarm ringing. Press A key again to stop alarm ringing.
Dual Time Mode
The dual time function can provide a different time zone time
- The seconds minutes in dual time mode and the seconds minutes in normal time mode run together.
Setting Dual Time
- Press C key to enter dual time mode;
- After entering dual time mode, press D key until "hour" starts flashing, can enter setting;
- The dual time mode can only set hour;
- Press A key to increase the value;
- Press D key to finish.