The SKMEI 2026 is a single-key digital watch: one key, marked A, carries every function — moving between the time and alarm screens, opening each setting mode, and stepping through the items inside it. What follows is the leaflet's own order: the key, the time setting, the seconds rule, the alarm, and what to do when something looks wrong.
- 10 digits display, display hour, minutes, seconds, date, week, 12/24H format
- Daily alarm and hourly signal
- EL backlight
Jump to: The A key · How to set the time · The seconds rule · How to set the alarm · When it sounds · Getting out · If something looks wrong
The A key
The leaflet labels the key A Key — MODE / SET / LIGHT. In practice that means three gestures: a press changes the mode or the flashing value, a two-second hold moves the setting to the next item, and a three-second hold opens or closes a setting mode.
The label also names LIGHT, but no step for it appears anywhere in the leaflet — the backlight is listed as a feature and never explained.
From the normal time screen, a press of A moves to the alarm screen, and the same press brings you back. The two screens are identical apart from the top-left indicator, which reads TH in time mode and AL in alarm mode.
How to set the time
In normal time mode, hold A for 3 seconds. The watch enters the time setting mode with the 24H marker flashing — that is the first item, the 12/24-hour format, and it is a choice between two states rather than a number to scroll.
From there the flashing item moves on in a fixed order: 12/24-hour format, seconds, hour, minutes, year, month, day, and then back to 12/24-hour format. The hour arriving after the minutes, and the year after both, is the order the leaflet's diagram prints.
- While an item is flashing, press A to change it.
- When it reads the way you want, hold A for 2 seconds and release to move to the next item.
- After the last item, hold A for 3 seconds to leave the setting mode.
In the year item the display shows 20 followed by two digits, and only those last two flash, so the century is not something you can adjust. The day and month items use that same four-digit area for their value.
One inconsistency in the leaflet. The sequence diagram labels the step between items simply "A key" and marks only the return to the first item "A key 2s", while the sentence above it says to hold A for 2 seconds and release. Follow the sentence: hold for 2 seconds when moving on.
What pressing A does to the seconds
When the seconds item is flashing and the watch is showing more than 29 seconds, a press of A resets the seconds to zero and adds one minute. That is how the watch gets lined up with a time signal without stepping the minutes forward by hand. The leaflet describes only that case; it does not say what a press does when the seconds are below 30.
How to set the alarm
Press A to reach the alarm screen, then hold A for 3 seconds. The hour flashes, and the mechanics are identical to the time setting: press A to change the value, hold for 2 seconds to move on, hold for 3 seconds to leave.
The order here is shorter: hour, minutes, alarm ON/OFF, hourly signal ON/OFF, and then back to hour. The last two are switches rather than values — the third item flashes the bell marker, the fourth flashes the speaker marker and the CHI indicator in the top-left corner.
When the alarm sounds
The alarm sounds for 10 seconds, in any mode, and a press of A stops it. The hourly signal is a separate thing: when it is on, the watch beeps twice every hour on the hour.
Getting out of a setting screen
There are two ways, and both are in the leaflet: hold A for 3 seconds, or simply stop pressing anything — after 10 seconds without a key operation the SKMEI 2026 returns to normal time mode by itself. The same 10-second rule applies while you are setting the alarm.
If something looks wrong
| What you see | What it means | What to do |
|---|---|---|
| One field flashes instead of the running time | The watch is in a setting mode, not stopped | Hold A for 3 seconds, or leave it alone for 10 seconds |
| The setting screen closed while you were deciding | 10 seconds passed without a key press | Open the setting again and walk back to the item |
| Pressing A on the seconds pushed the minute up by one | The seconds were above 29, so the press carried a minute | Nothing to fix — that is the watch being lined up to a time signal |
| The year will not go beyond the current century | Only the last two digits flash; the 20 in front is fixed | Set the two digits you need and leave the century alone |
| It beeps twice every hour on the hour | The hourly signal is switched on | Alarm screen, hold A 3s, then hold A 2s three times to reach the fourth item and switch it off |
| The alarm will not stop | It sounds for 10 seconds in any mode | Press A to cut it short |
| The display never lights up | The leaflet lists an EL backlight but gives no step for it | There is nothing in the leaflet to follow — the step is missing from the manual |
Source: the operation leaflet shipped with the SKMEI 2026. The steps, their order and all four figures are the leaflet's own; the two arrow labels are the leaflet's own; the troubleshooting table and the source note are ours, and the leaflet's silence on the backlight step is reported rather than filled in.