SKMEI 1142 Watch Manual

SKMEI 1142 Watch Instruction

SKMEI 1142 digital watch dial

(SKMEI 1142 Digital Watch Dial)

A. Features

  • 13 Digits, Hour, Minutes, Seconds, Month, Day and Week
  • Daily Alarm, Month & Date Alarm, and Chime hourly
  • 1/100 second Chronograph with split count
  • Second Time (DT) function
  • Count Down (Upper limit: 24H)
  • 2000----2099 Calendar, 12/24H
  • EL backlight

B. Operational Manual

At any station, press A key, the EL back light on for 3 seconds.
In Normal time Mode, Press B key to convert MODE as following:

How to change modes of SKMEI 1142

1. Time & date setting

  • In Normal time Mode, press D key to convert 12H/24H, “P” means 12H
  • In Normal time Mode, Hold C key till the Minutes flashing then enter into Time&Date setting Mode
  • Press B to choose Hours - Minute-Year-Month-Date, Press D Key to adjust the data.
  • Press C key to exit.

2. Alarm ON/OFF

  • In Alarm Mode, press C key to ON/OFF Alarm function.
  • If “signal” symbol appears, means ALM function ON, otherwise means OFF
  • When the Alarm function chiming, the symbol will be flashing and chiming for 10s, press any key to stop.

3. Alarm setting

  • In Alarm Mode, Hold C key till the alarm Hours flashing enter into Alarm setting.
  • Press B to choose Alarm Hour -- Minute--Month--Date, Press D Key to adjust the data.
  • When you are setting the Alarm Hour, pay attention to AM/PM
  • When you are setting the Alarm Month and Date, if you set the data of Month& Date, then on that Month& Date will alarm, if no data then means OFF the Month& Date alarm function.
  • If you ON the Alarm function, the alarm symbol will show in each Mode.
  • Press C to exit.

4. Chronograph functions

In Normal Mode, press B key twice enter into Chronograph Mode

  • Press D to start, press D again to suspend, press D again to continue, press D to suspend again, when suspend, press C key back to 0:00:00.
  • In Chronograph mode, press D key to start, press C key enter into split function, and the “SPL” symbol appear, press C key again to get the first group record ,but the second group still processing in the back ground, press C key again to continue the second group, press C key again to read the second group record......when the final group finished, Press D key to stop the SPL function, press C key read the final group(SUM) record, press C key again to clear the record to zero.

How to set chronograph of SKMEI 1142

5. Second Time Setting

  • In Second Time Mode, in the corner will show the symbol “DT”
  • Hold C key till the Hour flashing then enter into DT time setting Mode
  • Press B to choose Hours - Minute, Press D Key to adjust the data.
  • Press C key to exit.

6. Count Down Setting

  • In Count down Mode, in the corner will show the symbol “TR”
  • Hold C key till the Hour flashing then enter into TR time setting Mode
  • Press B to choose TR Hours - Minute, Press D Key to adjust the data
  • Press C key to exit the setting , press D key to start count down ,press D key again to suspend, press D key again to start again
  • After you suspend the count down, press C key to stop count down function back to the count down time which you setting
  • After you start the count down, press M back to Normal Time Mode, and the count down working on the background.
  • Count down time could be setting between 1 minutes to 24H,if you wanna to setting the count down time setting in 24H, then setting the count down time in 0:00:00
  • After you finished the countdown to 0:00:00, the watch will chime for 15s, press any key to stop chime and back to the count down time which you are setting.

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published