◆SKMEI 1586 Watch Instruction
（SKMEI 1586 Synchronous watch button）
A. Features
- 6 Digits LCD Display, Display Hour, Minute, Second, Month, Day and Week
- Daily Alarm and Chime hourly
- 12 / 24H format select-able, fully automatic calendar
- 1/100 second Chronograph
- Dual time
- 2000-2049 Years,automatic week
- Synchronous movement
- LED backlight
B. Operational Manual
1.At any state ,press A Key, LED will light up for 3 seconds.
2.Hour/Minute Hand Mode
- At any state,Press D key to adjust hand and hold D key to adjust quickly
3.Real Time
- Press C key for 2 seconds to enter into the time setting mode. "Second " flashing when loading , press B key to zero ; Press C key to select the blinking digit according to the following sequence:Hour Minute 12H/24H . Press B key to adjust the flashing item.
- While the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes . In the range of 00 to 29,the minutes are unchanged.
- Press B key to adjust time and hold B key to adjust quickly
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Real Time Display Mode.
4.Date Mode
- Press C key for 2 seconds to enter into the date setting mode "Month" flashing when loading .Press C key to select item as following sequence: Day and Week .Press B key to adjust the flashing item.
- Press B key to adjust date and hold B key to adjust quickly
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Date Display Mode.
5.Alarm Mode
- Press C key for 2 seconds to enter into the alarm setting mode, "Hour" flashing .Press C key to select item as following sequence: "Minute (ten's digit )", "Minute ( unit's digit )", "ALM/SIG" switch . Press B key to adjust the flashing item.
- When setting “ ALM/SIG ” switch , the sequence is as follows :
- If alarm is on, the alarm tone will sound for 20 seconds when it reaches the setting time.
- Press B key to adjust date and hold B key to adjust quickly
- If there is no key operation for 60 seconds, it will exit and return to Alarm Display Mode.
6.Dual time Mode
- Press C key for 2 seconds to enter into the Dual time setting mode," Hour " flashing . Press C key to select item as following sequence :Minute 12H/24H
- Press B key to adjust time and hold B key to adjust quickly
- If there is no key operation for 60 second, Setting Mode will be exit and returned to Dual Time Display Mode.
7.Chronograph Mode
- Press C key to Start/Stop running ; When stop , press C key for 2 seconds to return to zero .