◆SKMEI 1828 Watch Instruction
（SKMEI 1828 Digital Watch Button）
A. Features
- 12 Digits LCD Display, Display Hour, Minute , Second , Month, Day, Year and Week
- Daily Alarm and Chime hourly
- Snooze function（SNZ）
- 12 / 24H format selectable, Auto Calendar
- 1/100 second Chronograph with split functions
- Timer
- Dual Time
- EL backlight
B. Operational Manual
At any state ,press A backlight for 2s .
Normal Time Mode
- Time Setting
- Press and hold C key for 2s to time setting mode and "Second" flashing, press D key to zero; Press B key to select item as following sequence :
- Press D key to adjust the flashing item,
- Press C key to return to Normal Time Mode.
- Press D key while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes .In the range of 00 to 59 resets them to 00 and adds to the minutes. In the range of 00 to 29,the minutes are unchanged.
- 12/24-Hour format :In the timekeeping Mode, press D key to toggle between 12-hour (12H) and 24-hour (24H) timekeeping.
Daily Alarm Mode
- In alarm mode, press C key to turn on/off the alarm and snooze function (
/SNZ) in turn. - In alarm mode, press D key once to enter the hourly timekeeping screen, press C key on this screen to turn on/off (
) the hourly timekeeping. - When the alarm is turned on, () will flash when the alarm set time is reached, and the alarm will sound for 10 seconds and then stop automatically.
Alarm setting
- In Alarm Mode, Hold C key till the alarm Hours flashing enter into Alarm setting.
- Press B key to choose Alarm Hour -- Minute--Month--Date, Press D Key to adjust the data.
- When you setting the Alarm Hour,pay attention to AM/PM.
- When you setting the Alarm Month and Date, if you set the data of Month& Date, then on that Month& Date will alarm, if no data then means OFF the Month& Date alarm function.
- If you ON the Alarm function , the alarm symbol ()will show in each Mode.
- Press C key to exit.
Remarks:
Set the month, day, hour, and minute of the alarm clock to make the alarm sound. when it reaches the set date and time;“--”means all. for example, if the month is set to “--”the alarm will sound every month.
Chronograph Mode
- Press D key to Start/Stop running ;
- When stop, press C key to zero.
- When running ,press C key to split Counting. Then press D key to exit split count ,and stop counting ; When exit split count ,press C key to zero.
- When running, press B key to return to Real Time mode, and it running at back.
Dual Time Mode
- In Normal Time mode , Press B key 3 times to enter Dual Time Mode,
- Press and hold C key for 2s to select " Hour " setting, Press B key to select " Minute " setting,
- Press D key to adjust the flashing item,
- Press C key again to finish setting ,and return to Dual Time displaying mode .
Timer Mode
- The display range of the timer is 23hour 59minute 59 second.
- Timer alarm sounds for about 15 seconds when counting down to 0:00:00. The timer is automatically reset to its starting value after the alarm stops.
- Timer Time setting
- Press and hold C key for 2s to time setting state and "Hour" flashing , Press B key to select "Hour" or "Minute" setting , press D key to adjust the flashing item, Press C key to complete setting.
- Timer operation
Press D key to Start/Stop counting ; Press C key to starting value when stop counting.