SKMEI 1616 Digital Watch Manual

◆SKMEI 1616 Watch Instruction

（SKMEI 1616 digital watch button）

A. Features

• 8 Digits LCD display, display hour,minute,second,day,month,week
• 1/100 seconds stopwatch, seconds,minutes,hours,24-hour display
• Daily Alarm and Chime hourly
• Timer
• Dual time
• EL backlight

B. Operational Manual

In non-set mode, press C key to select operation mode.Press B key in any mode EL backlight for 3s.

1.Real time mode

Time and date setting

• In real time mode, press D key for 2s to enter time setting.

1. "Second" flashing, press A key to zero, press C key to select item as following sequence:
   
2. Press A key to adjust the flashing item.
3. Press C key to return to Real Time Mode.
4. While the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29,the minutes are unchanged.
5. 12/24-hour format: In the timekeeping Mode, press A key to toggle between 12-hour(12H) and 24-hour(24H) timekeeping.
6. Press D key to exit the setting state and return to time mode.

2.Chronograph mode

• In chronograph mode, press A key to start/stop running, when stop, press D key to zero
• Press A key to start, press D key to enter split counting state, then start split measurement.Press A key to start and notes first runner finishes ,and press D key to stop split counting,notes second runner finishes, finally press D key to clear.

To measure times with the stopwatch

3.Alarm mode

• Press A key to turn on/off Alarm and hourly chime.() ( )
• When Alarm is ON, the alarm symbol ( ) will flash once it reach the setting time. After 15 seconds,it will stop automatically.
• Press D key for 2s to enter the alarm time setting state.

1. "Hour" flashing, press C key to select item as following sequence:
   
2. Press A to add 1 to the flashing item, hold A key for 2s and then increment quickly.
3. When using the 12-hour format, the alarm time of the morning (no indicator appears) and noon (the PM indicator appears).
4. Press D key to exit the setting state and return to time mode.

4.Timer mode

• Press A key to start countdown.
• When the countdown stops, the timer is automatically reset to its starting value after the alarm stops.
• Timer alarm sounds about 10s when counting down to 0:00:00.Press any key to stop, the maximum countdown time is 23 hours, 59 minutes, 59 seconds.
• When the countdown stops, press the D key to restart.
• Press D key for 2s to enter the timer setting state.

1. Press C key to select item as following sequence:
   
2. Press A key to adjust the flashing item.
3. Press D key to exit the setting state and return to timer mode.

5.Dual time mode

• In the dual Time mode, press D key for 2s until "hour" flash, dual time only can set the hours.
• Press A key to adjust the flashing item.
• Press D key to exit the setting state and return to dual time mode.