SKMEI 1773 Digital Watch Manual

◆SKMEI 1773 Watch Instruction

（SKMEI 1773 Digital Watch Button）

Features

• Timing function display: seconds, minutes, hours, date, day of the week and month;
• Stopwatch has 1/100 seconds, seconds, minutes and hours;
• SPL segment timing function;
• Countdown function with second, minute and hour display;
• 12 hours and 24 hours display;
• Time function;
• Alarm clock and punctuality function;
• Colorful lights display.

Select Function Mode

• Press C key to switch the mode .
• At any function screen display, press B key to light the colorful light display (long press switch light).

Function Description

• Normal time mode can be used to set and check the current time, day and week, in the normal time mode screen press A key can check the month and day, in order to distinguish the current day and month, in the normal time mode just display day.

Time and Date Setting

1. In normal time mode, press D key until the seconds start flashing , you can set them
2. Press C key to switch setting item as below (flashing can be set):
   
3. Press C key to change the set value as below
   

   setting	keys operation
   seconds	Press A key can make seconds to zero
   Hours, minutes, month, day, week	Press A key can change the set value
   12/24 hour conversion	Press A key can alternate 12 hours or 24 hours mode

4. Press D key to return to the normal mode.

• This watch with automatic calendar, but when you replace the battery, you need to set the calendar again.

Alternate 12/24 hour mode

• In 12/24 hour display screen,press A key to alternately change 12 hours or 24 hours mode
• 12-hour mode, the indicator“ P”( afternoon) will appear on hour’s left side, indicating the time between noon and 11:59 p.m.; between midnight and 11:59 a.m., no indicator will appear on hour’s left;
• 24-hour mode, the time will be between 0:00 and 23:59, at this time, no indicator appears;
• Other function of this watch will be set at 12/24 hour mode according to normal time mode selecting.

Stopwatch function

• Stopwatch function can be used to measure elapsed time, midway time and completion time of two contestants;
• The measurement range of this watch is 23 hours 59 minutes 59.99 seconds;
• If you do not stop the stopwatch, it will continue to test time, when reach the time limit, stopwatch will re-test time from 0;
• Even if you exit the stopwatch function screen,stopwatch will also continue to measure time.

Use stopwatch to measure time (as below)

Alarm Setting

• This watch can set normal time alarm time and second time alarm time, both can only choose one to set, it can be time, minutes, normal time alarm 1/ second time alarm 2 set;
• This watch with hour alarm function, after turning on this function,2 beeps will be emitted every hour;
• Alarm setting (and hour alarm function setting) must be in the alarm function mode, press C key to enter the function mode;
• At the alarm function mode, press A key to open or stop the alarm function;
• after alarm function open, the alarm function indicator will be appeared in all mode screen.

1. In alarm mode, press D key until the alarm time flashes, can start setting;
2. Press C key to set alarm time as below( flashing can be set)
   
   
3. Press A key to increase the set value when it flash; If in 12 hours mode, pay attention to the alarm time in the morning (no indicators) and afternoon (with indicator P), set must be correct;
4. Press D to finish setting.

Remarks：

• When Reaching the alarm time, the alarm will ring for 15 seconds
• Press any key can stop the alarm ringing;
• In every function mode, alarm and hour alarm will be rung;
• After displaying the alarm mode, press A key to open or stop the alarm function;
• After hour alarm function open ,indicator (CH)will appear in the all mode screen.

Countdown function

Measurement range is 23 hours 59 minutes 59.99 seconds;

Setting the countdown

1. Press C key to enter the countdown time mode;
2. After entering the countdown time mode, press D key until the hour start flashing, can enter setting ;
3. Press C key follow below to set (flashing can be set);
   
4. Press A key to adjust the flashing value;
5. Press D key to finished setting. Then press A key to start/stop to countdown function;
6. At the end of the countdown ,10 seconds ahead of with 1 ringing /second, the end of the countdown issued 3 ringing/ second , lasting 10 seconds.

Test Alarm Ringing

• When display 0:00 00 in countdown mode, press A key can make alarm ringing. Press A key again to stop alarm ringing.

Dual Time Mode

The dual time function can provide a different time zone time

• The seconds minutes in dual time mode and the seconds minutes in normal time mode run together.

Setting Dual Time

1. Press C key to enter dual time mode;
2. After entering dual time mode, press D key until "hour" starts flashing, can enter setting;
3. The dual time mode can only set hour;
4. Press A key to increase the value;
5. Press D key to finish.